Captiveworks Cw 600s Premium Bin Files
* The CW-600S has a Cx24138 processor and 2MB flash memory, the CW-600S Premium has a Cx24142 processor and 4mb flash memory. The Captive Works CW-600SP FTA receiver comes with remote control, serial cable for updating your receiver, 4x1 diseqc switch and a 1 year warranty.
Guide by user:Frankott. PLEASE DO NOT PM ME WITH QUESTIONS, POST THEM IN A NEW THREAD. Download the latest file. Download the LOADER - UpgradeV1.06 HOW TO FLASH.
You can flash (load) your receiver with a bin on top of the bin (file) you already have. It will replace it. Use a Null CABLE RS232 on your receiver from the computer. Or use a Null adaptor from Radio Shack number 26-264B to make a straight through cable a Null cable. Take the cable off going to the LNB to be safe. If you don't have a 9 pin plug on your computer you may need to use a USB to Serial cable 26-183 at Radio Shack with a Null adaptor.
If you need a 9 pin mail to mail gender adapter it is item #: 26-231. You will need to install a drive in your computer for the USB cable. Un-zip all the files and hook up the cable from your computer to the STB, have the STB off with the switch in the back. Start the loader and click on the FILE folder. Find the bin file you un-zipped that now ends in BIN. Click on it and it will automatically go in the loader. Select DOWNLOAD S/W then select a COM PORT.
NOT on the remote but in front of the receiver hold in the power button as you turn the switch ON in the back. The word BOOT will stay on the STB front panel. Now you can click START on your loader and the% should move up.
Don't do anything as the progress bar is going across. Make sure the Computer & STB are done before you go to the next step.
Driver ethernet controller pci ven8086 software. When setting up my own Win7 i deleted the Ubuntu partition and also DELLUTILITY partition, which (i think) is causing me the driver problems, so my question is, is there any way for me to get that DELL partiton back, even if that means yet another windowd re instalation. I forgot to mention, not sure if important, i just bought this computer, and before Win7 it had Ubuntu installed on it. I did all told below, got things working, but my wireless connection is really bad, it keeps connecting and disconnecting all the time.
They may not get done at the same time. The receiver needs up to one minute to process the data after the computer is done, (DON'T RUSH THIS).
The receiver will count down twice then show '-End'. When done turn receiver OFF & ON from the back. You may need to do a FACTORY DEFAULT instructions below. 2 legacy lnb hookup. PLUGGING IN CABLE. BE SURE THE REAR SWITCH IS OFF DURING HOOKUP OR YOU WILL BURN OUT YOUR DISEQC SWITCH.(edit-arbor) Make sure you plug in the cable from the dish to the receiver at the LNB IN. The cables coming from the dish to the switch should be put on the switch at the same number as you have set in your receiver.
'Example', 119 cable goes on number 1 on the diseqc switch and the receiver has #1 for 119 in the program. You can only get one Satellite for each one LNB you have. Two LNB's two Satellites, and so on.
You should set your settings. Below is what you may be able to use. MENU, INSTALLATION, ANTENNA SETTING side arrow to ECHOSTAR 7 (119W). Then do the same to ECHOSTAR 6,8 or 8,10 (110W) ----------------------EchoStar 7 119W.----EchoStar 8,10 110-------Nimiq 1 91W Transponder--12224/V/20000/5/6--12224/V/20000/5/6--10964/V/19850/3/4 Or one that is close. LNB Freq------------11250----------------------11250-------------------------11250 LNB Type------------Standard----------------Standard----------------------Standard Dish Pro change to OCS-DP 22kHz-------------------OFF------------------------Off----------------------------Off Can't use 3 Satellites with this switch. Diseqc Number------LNB1----------------------LNB2--------------------------LNB3 This should match the cables on the switch.
Legacy SW-------------OFF-----------------------OFF----------------------------OFF Motorised System---None----------------------None---------------------------None If you don't have a motor. THIS IS WHAT THE SETTINGS ARE. You can start here then change them later.